Laboratory of Civil Engineering

Laboratory of Civil Engineering as explained follows functions as the center of practical and experimental learning used by the students and service for research and engineering consultation covering the design of building, bridge, road, irrigation, water, survey, and mapping.[Contact Person ; Ir. Alik Ansyori Alamsyah, MT]

a. Laboratory of Concrete Technology 

Laboratory of Concrete Materials Technology is used for several purposes for checking and knowing the characteristics of concrete materials, fresh concrete mixing planning in the field, and concrete testing implementation in the laboratory based on S.K. SNI 1991. Besides being used for practicum in course, this laboratory is also used for student and lecturer research facility and Technical (service) consultation service of materials and concrete technology field.

The equipments owned for the implementation of practicum agenda has fulfilled the standard of practicum equipment of concrete technology, such as : Laboratory Concrete Mixer, Concrete Testing Machine, Slump Test, Electric Vibrator Laboratory, Moduluis Of Elasticity in Concrete Test, Capping Compound Warmer, Concrete Flow Table Hand, Sieve Brass Analysis, Sieve Shaker Electric, Density Baskett, Heavy Duty Solution Balance, Mortar Mixer, Vicat apparatur Test, Oven, etc. Those equipments are used for a). Concrete Materials, b). Concrete mix planning, c). Concrete checking and testing; deciding the concrete strength within 28 days. 

b. Laboratory of Soil Mechanics

This laboratory is used for the exploration of soil, so it can be known and recognized the physical characteristics and type of soil in the laboratory, both in undisturbed and disturbed condition and conduct testing and checking of soil in the field. Besides, used for practicum in course, this laboratory is also used for student and lecturer research facility and Technical (service) consultation service of soil mechanical field.

To support the practicum agenda, the equipments owned has fulfilled practicum equipment standard of soil mechanical laboratory, such as : Hand Bor, Standart Penetration Test, Sample extruder, Dutch Cone Penetrometer/Sondir, Sand Cone Test, Rubber Ballon Test, Sieve Shaker, Hydrometer Analysis Test, Compaction test, Atterberg Limit Test, Laboratory CBR Test, Unconfined, Compression Machine, Consolidation Test, Permeability Test, Direct Shear Test, etc. that can be used for a). Taking sample with Bor, b). Testing soil with sondir tool, c). Checking soil with Sand Cone, d). Checking water content, e). Checking soil density, f). Soil particle analysis (sieve analysis and  hydrometer test), g). Checking soil consistency (Atterberg borders), h). Checking soil density (standart dan modified), i). Checking Soil Pressure, j). Checking CBR (California Bearing Ratio) of field, k). Checking soil sliding, l). Checking soil consolidation, m). Checking soil permeability. 

c. Laboratory of Geometry 

The agenda in the laboratory of geometry is conducting practicum of geometry as supporting facility for the students, so they are able to measure angle and different heigh in certain locations and can make a situation map from certain regions precisely and accurately. The tools which are owned are Waterpas , Thedolite (manual and digital), Measuring Tub, Yallon. This laboratory is used for student and lecturer research facility and Technical (service) consultation service of survey field.

d. Laboratory of Road

This road laboratory is equipped with several facilities/tools, such as: Los Angeles Abrassion Machine, Sieve, Oven Sand Equivalent Test Set, Penetration Test Set, Ductility Test Set, Flash and Fire Point Test Set, Softening Point Screw Test Set, Automatic Bitumenous Compactor, Solubility of Bitumenous Material, Viscosity Test Set, Benkelmen Beam Apparatus, Thermometer, Scale, Container, Softening Point Test, Absorsion of fir Aggregate, Dunagan Test set, and Glooch Crucible. This laboratory is used for student and lecturer research facility and Technical (service) consultation service of road.

e. Laboratory of Hydraulics

Hydraulics laboratory is equipped with several facilities/tools such as: closed and opened channels, Staff Ponit Gauge. Basic Hidraulic Bench, Dead Weight Calibrator, Hydrostatic Pressure, Flow Over Weirs, Bernaulli Therm Demostration, Osborne Reynold Demostrasion, Flowmeter Demontrasion, Velocity Meter, and Analoque Indicator. This laboratory is used for student and lecturer research facility and Technical (service) consultation service of water field. 

 

 
Shared: